top of page

Jean Labs Group

Public·41 members
Jameson Lee
Jameson Lee

How to Customize Your Weierwei Vev 3288s with Software 20: Tips and Tricks


Weierwei Vev 3288s Software 20: A Guide for Beginners




If you are looking for a reliable, affordable, and easy-to-use walkie-talkie, you might want to consider the Weierwei Vev 3288s. This is a popular model among amateur radio enthusiasts, security personnel, outdoor adventurers, and business users. It has a compact design, a long battery life, a clear sound quality, and a wide range of features. However, to get the most out of your Weierwei Vev 3288s, you need to have the right software to program it. That's where Weierwei Vev 3288s Software 20 comes in.




Weierwei Vev 3288s Software 20


Download Zip: https://www.google.com/url?q=https%3A%2F%2Fvittuv.com%2F2ul1W0&sa=D&sntz=1&usg=AOvVaw0fRbI58zapi-EDzNCzKUj_



In this article, we will explain what Weierwei Vev 3288s Software 20 is, why you need it, how to download and install it, and how to use it. By the end of this article, you will be able to customize your walkie-talkie according to your needs and preferences. You will also learn some tips and tricks to make your communication more efficient and enjoyable.


Introduction




What is Weierwei Vev 3288s?




Weierwei Vev 3288s is a handheld two-way radio that operates on the UHF band (400-470 MHz). It has a maximum output power of 5 watts and a maximum communication range of about 6 kilometers. It supports up to 118 channels and has a built-in FM radio function. It also has a dual display, a dual standby, an emergency alarm, a low battery alert, a VOX function, and a flashlight. It comes with a rechargeable lithium-ion battery, an antenna, a belt clip, a charger, an earpiece, and a user manual.


What is Weierwei Vev 3288s Software 20?




Weierwei Vev 3288s Software 20 is a computer program that allows you to program your walkie-talkie using your PC. It lets you change various settings such as frequency range, channel steps, CTCSS/DCS codes, squelch level, voice prompt, scan function, keypad lock, power saving mode, volume, backlight, etc. It also lets you save and load different configurations for different scenarios. It is compatible with Windows XP, Vista, 7, 8, and 10 operating systems. It requires a USB programming cable to connect your walkie-talkie to your PC.


Why do you need Weierwei Vev 3288s Software 20?




You might be wondering why you need Weierwei Vev 3288s Software 20 when you can manually program your walkie-talkie using the keypad. Well, there are several reasons why using the software is better than using the keypad. Here are some of them:



  • Using the software is faster and easier than using the keypad. You can change multiple settings at once and see the changes on your PC screen. You don't have to press multiple buttons and navigate through multiple menus on your walkie-talkie.



  • Using the software is more accurate and reliable than using the keypad. You can avoid mistakes and errors that might occur when you enter the data manually. You can also verify and correct the data before writing it to your walkie-talkie.



  • Using the software is more flexible and versatile than using the keypad. You can create and edit different profiles for different situations and purposes. You can also backup and restore your data in case you lose or damage your walkie-talkie.



  • Using the software is more fun and enjoyable than using the keypad. You can customize your walkie-talkie according to your personal taste and style. You can also explore and experiment with different features and functions that you might not know or use otherwise.



As you can see, using Weierwei Vev 3288s Software 20 has many advantages over using the keypad. It can help you improve your communication experience and performance with your walkie-talkie. It can also help you learn more about your walkie-talkie and its capabilities.


How to download and install Weierwei Vev 3288s Software 20




Now that you know what Weierwei Vev 3288s Software 20 is and why you need it, let's see how to download and install it on your PC. The process is simple and straightforward, but you need to follow some steps carefully. Here are the steps:


Step 1: Visit the official website of Weierwei Electron Science & Technology Co.,Ltd.




The first step is to visit the official website of Weierwei Electron Science & Technology Co.,Ltd., which is the manufacturer of Weierwei Vev 3288s walkie-talkie. The website address is http://www.weierwei.com.cn/. This is where you can find the latest version of Weierwei Vev 3288s Software 20, as well as other information and resources about Weierwei products.


Step 2: Find the software download section and click on the link for VEV-3288S/338 New




The second step is to find the software download section on the website. You can do this by scrolling down to the bottom of the homepage and clicking on the "Download" button. This will take you to a page where you can see various software options for different models of Weierwei walkie-talkies. You need to look for the one that says "VEV-3288S/338 New" and click on it. This will start downloading a zip file named "VEV-3288S_338_New.zip" to your computer.


Step 3: Save the file to your computer and unzip it




The third step is to save the file to your computer and unzip it. You can do this by choosing a location where you want to save the file, such as your desktop or downloads folder, and clicking on "Save". Then, you need to locate the file on your computer and right-click on it. You will see an option that says "Extract All" or something similar. Click on it and follow the instructions to unzip the file. You will get a folder named "VEV-3288S_338_New" that contains two files: "VEV-3288S_338_New.exe" and "Readme.txt".


Step 4: Connect your Weierwei Vev 3288s walkie-talkie to your computer using a USB programming cable




The fourth step is to connect your Weierwei Vev 3288s walkie-talkie to your computer using a USB programming cable. A USB programming cable is a special cable that allows you to transfer data between your walkie-talkie and your PC. You can buy one online or from a local radio shop. To connect your walkie-talkie to your PC, you need to do the following:


  • Turn off your walkie-talkie and remove the battery cover and the battery.



  • Locate the programming port on the back of your walkie-talkie. It is a small hole with four metal pins inside.



  • Plug one end of the USB programming cable into the programming port. Make sure the pins are aligned correctly and the cable is firmly inserted.



  • Plug the other end of the USB programming cable into a free USB port on your PC.



  • Put the battery back into your walkie-talkie and close the battery cover.



  • Turn on your walkie-talkie and set it to channel 1.



You have now successfully connected your walkie-talkie to your PC. You should hear a sound from your PC indicating that a new device has been detected.


Step 5: Run the software and select the correct COM port




The fifth step is to run the software and select the correct COM port. A COM port is a communication port that allows your PC to communicate with your walkie-talkie. To run the software and select the correct COM port, you need to do the following:



  • Go to the folder where you unzipped the software and double-click on "VEV-3288S_338_New.exe". This will launch the software and open a window that looks like this:






  • In the top left corner of the window, you will see a drop-down menu that says "COM1". This is where you need to select the correct COM port for your walkie-talkie. To do this, you need to check which COM port your PC has assigned to your walkie-talkie. You can do this by going to your PC's device manager and looking for "Ports (COM & LPT)" or something similar. You should see something like this:






  • You will see a list of COM ports with different names and numbers. You need to find the one that says "USB-SERIAL CH340 (COMx)" or something similar, where x is a number. This is the COM port for your walkie-talkie. For example, in this case, it is COM3.



  • Go back to the software window and click on the drop-down menu that says "COM1". You will see a list of COM ports from COM1 to COM16. You need to select the one that matches the one you found in the device manager. For example, in this case, it is COM3.



  • You have now selected the correct COM port for your walkie-talkie. You should see a green light next to it indicating that it is connected.



Step 6: Read the data from your walkie-talkie and modify it as needed




The sixth step is to read the data from your walkie-talkie and modify it as needed. The data includes all the settings and parameters that control how your walkie-talkie works. To read and modify the data, you need to do the following:


  • In the software window, click on the button that says "Read". This will read the data from your walkie-talkie and display it on the software window. You will see something like this:






  • You will see different tabs and fields that show different settings and parameters. You can click on each tab and field to see and change the values. For example, you can click on the "Frequency Range" tab to see and change the frequency range of your walkie-talkie. You can also click on the "Channel" tab to see and change the channel settings of your walkie-talkie.



  • You can modify the data as needed according to your preferences and requirements. You can also use the "Default" button to restore the default values of the data. You can also use the "Open" and "Save" buttons to open and save different files of data.



  • After you have modified the data as needed, you need to write it back to your walkie-talkie. To do this, click on the button that says "Write". This will write the data to your walkie-talkie and confirm it with a message that says "Write OK".



You have now successfully programmed your walkie-talkie using Weierwei Vev 3288s Software 20. You can disconnect your walkie-talkie from your PC and test it to see if it works as expected.


How to use Weierwei Vev 3288s Software 20




Now that you have programmed your walkie-talkie using Weierwei Vev 3288s Software 20, let's see how to use it. In this section, we will show you some examples of how to use some of the features and functions that you can control with the software. These are not exhaustive, but they will give you an idea of what you can do with your walkie-talkie.


How to change the frequency range and channel steps




One of the things that you can do with Weierwei Vev 3288s Software 20 is to change the frequency range and channel steps of your walkie-talkie. The frequency range is the range of frequencies that your walkie-talkie can operate on. The channel steps are the increments between each frequency. Changing these settings can help you access more channels and avoid interference from other users or devices.


To change the frequency range and channel steps, you need to do the following:



  • In the software window, click on the "Frequency Range" tab. You will see something like this:






  • You will see two fields that show the minimum and maximum frequency of your walkie-talkie. You can change these values by typing in new numbers or using the arrows. For example, if you want to change the frequency range from 400-470 MHz to 420-450 MHz, you can type in 420000000 in the minimum field and 450000000 in the maximum field.



  • You will also see a field that shows the channel step of your walkie-talkie. You can change this value by typing in a new number or using the arrows. For example, if you want to change the channel step from 12.5 kHz to 25 kHz, you can type in 25000 in the channel step field.



  • After you have changed the frequency range and channel step as desired, you need to write the data to your walkie-talkie. To do this, click on the "Write" button and wait for the confirmation message.



You have now changed the frequency range and channel step of your walkie-talkie. You can check the new settings on your walkie-talkie by pressing the "Menu" button and scrolling to the "Frequency" option. You should see the new frequency range and channel step displayed on your walkie-talkie screen.


How to set up the CTCSS/DCS codes and squelch level




Another thing that you can do with Weierwei Vev 3288s Software 20 is to set up the CTCSS/DCS codes and squelch level of your walkie-talkie. The CTCSS/DCS codes are sub-audible tones that are used to filter out unwanted signals and noise from other users or devices. The squelch level is the threshold of signal strength that is required to open the speaker and let you hear the incoming audio. Setting up these settings can help you improve your communication quality and privacy.


To set up the CTCSS/DCS codes and squelch level, you need to do the following:



  • In the software window, click on the "Channel" tab. You will see something like this:






  • You will see a table that shows the channel settings of your walkie-talkie. You can change these settings by clicking on each cell and choosing a value from the drop-down menu or typing in a number. For example, if you want to change the CTCSS/DCS codes and squelch level for channel 1, you can click on the cells under "CTCSS/DCS Dec" and "CTCSS/DCS Enc" and choose a code from the list, such as 67.0 Hz or D023N. You can also click on the cell under "SQL" and choose a level from 0 to 9, where 0 is the lowest and 9 is the highest.



  • You can repeat this process for each channel that you want to change. You can also use the "Copy" and "Paste" buttons to copy and paste the settings from one channel to another.



  • After you have set up the CTCSS/DCS codes and squelch level as desired, you need to write the data to your walkie-talkie. To do this, click on the "Write" button and wait for the confirmation message.



You have now set up the CTCSS/DCS codes and squelch level of your walkie-talkie. You can check the new settings on your walkie-talkie by pressing the "Menu" button and scrolling to the "CTCSS/DCS" and "SQL" options. You should see the new codes and level displayed on your walkie-talkie screen.


How to enable or disable the voice prompt and scan function




Another thing that you can do with Weierwei Vev 3288s Software 20 is to enable or disable the voice prompt and scan function of your walkie-talkie. The voice prompt is a feature that lets you hear a voice message that tells you the status and mode of your walkie-talkie. The scan function is a feature that lets you scan through all the channels and stop at the ones that have activity. Enabling or disabling these features can help you use your walkie-talkie more conveniently and efficiently.


To enable or disable the voice prompt and scan function, you need to do the following:



  • In the software window, click on the "Other" tab. You will see something like this:






  • You will see two fields that show the voice prompt and scan function settings of your walkie-talkie. You can change these settings by clicking on each field and choosing a value from the drop-down menu. For example, if you want to enable the voice prompt and disable the scan function, you can choose "ON" for the voice prompt field and "OFF" for the scan function field.



  • After you have enabled or disabled the voice prompt and scan function as desired, you need to write the data to your walkie-talkie. To do this, click on the "Write" button and wait for the confirmation message.



You have now enabled or disabled the voice prompt and scan function of your walkie-talkie. You can check the new settings on your walkie-talkie by pressing the "Menu" button and scrolling to the "Voice" and "Scan" options. You should hear the voice prompt if it is enabled and see the scan icon if it is enabled on your walkie-talkie screen.


How to customize the keypad lock and power saving mode




Another thing that you can do with Weierwei Vev 3288s Software 20 is to customize the keypad lock and power saving mode of your walkie-talkie. The keypad lock is a feature that prevents accidental or unauthorized use of your walkie-talkie by locking the keypad. The power saving mode is a feature that reduces the power consumption of your walkie-talkie by adjusting the transmission and reception cycles. Customizing these features can help you protect your walkie-talkie and extend its battery life.


To customize the keypad lock and power saving mode, you need to do the following:



  • In the software window, click on the "Other" tab. You will see something like this:






  • You will see two fields that show the keypad lock and power saving mode settings of your walkie-talkie. You can change these settings by clicking on each field and choosing a value from the drop-down menu. For example, if you want to set the keypad lock to manual and the power saving mode to level 2, you can choose "Manual" for the keypad lock field and "Level 2" for the power saving mode field.



  • After you have customized the keypad lock and power saving mode as desired, you need to write the data to your walkie-talkie. To do this, click on the "Write" button and wait for the confirmation message.



You have now customized the keypad lock and power saving mode of your walkie-talkie. You can check the new settings on your walkie-talkie by pressing the "Menu" button and scrolling to the "Lock" and "Save" options. You should see the keypad lock and power saving mode icons if they are enabled on your walkie-talkie screen.


How to adjust the volume and backlight settings




Another thing that you can do with Weierwei Vev 3288s Software 20 is to adjust the volume and backlight settings of your walkie-talkie. The volume is the level of sound that you hear from your walkie-talkie speaker or earpiece. The backlight is the light that illuminates your walkie-talkie screen and keypad. Adjusting these settings can help you hear and see better in different environments and situations.


To adjust the volume and backlight settings, you need to do the following:



  • In the software window, click on the "Other" tab. You will see something like this:






  • You will see two fields that show the volume and backlight settings of your walkie-talkie. You can change these settings by clicking on each field and choosing a value from the drop-down menu. For example, if you want to set the volume to level 5 and the backlight to level 3, you can choose "Level 5" for the volume field and "Level 3" for the backlight field.



  • After you have adjusted the volume and backlight settings as desired, you need to write the data to your walkie-talkie. To do this, click on the "Write" button and wait for the confirmation message.



You have now adjusted the volume and backlight settings of your walkie-talkie. You can check the new settings on your walkie-talkie by pressing the "Menu" button and scrolling


About

Welcome to the group! You can connect with other members, ge...

Members

  • Huguens Jean
  • Lorran Lom
    Lorran Lom
  • Namjor
    Namjor
  • Tarsuff
    Tarsuff
  • Adhavi Joshi
    Adhavi Joshi
bottom of page