Windows 7 Rearm Forever 2013: A Step-by-Step Tutorial to Use a Batch Script File and WinRE to Extend Your Trial Period
Thank you very much for your help. Finally I downloaded a windows 10 copy from Microsoft to a usb disk drive, which was fast and easy. I modified the BIOS for booting the PC from the USB port, and in relatively low time the windows was installed. Regards!
Windows 7 Rearm Forever 20 13
I am testing with Win 10 Enterprise LTSC. I use the keys indicated in -us/windows-server/get-started/kmsclientkeys : M7XTQ-FN8P6-TTKYV-9D4CC-J462D. I have also tested using a Windows 10 Enterprise 1803 build using NPPR9-FWDCX-D2C8J-H872K-2YT43.
this method would kill all services with the same PID, if i do this with windows update (which is hogging cpu) it will close others of the same PID, this i know will cause my pc to reboot, is there anyway to close an individual service without closing all services with the same PID
I tried testing with WinSCP and FileZilla and got to see Passive mode connections are working fine and Active not which is an expected behavior.We checked why the 'dir' command is not working from the devices after the successful authentication, we got to see that the windows firewall is blocking the connection. We disabled the firewall and the everything started working as expected.I checked the same on my end after creating the firewall rule, issues were resolved. There was one system which even after disabling firewall was stuck at directory listing, this might be an issue within that system or the connections are being blocked by an external factor.Since after disabling most of us are able to work fine.
The following compliance devices are used in conjunction with compliance software to demonstrate USB hub or host compliance. These devices are not designed for use with the windows stack, and are only to be used with host and hub specific tests. Please address host or hub testing questions to usbcompliance.org.
SuperMUTT The Microsoft SuperMUTT operates as a Full Speed, High Speed, and SuperSpeed compliance device. XHCICV and USB3CV can programmatically change the SuperMUTT to operate at the desired speed. We recommend using the SuperMUTT instead of the older compliance devices. Use SuperMUTT firmware version 57 or later. The firmware updating utility can be downloaded here or directly from Microsoft. Additional info can be found here: -us/windows-hardware/drivers/usbcon/muttutil. Ordering instructions are found here: -us/windows-hardware/drivers/usbcon/microsoft-usb-test-tool--mutt--devices. Contact email@example.com with any questions.